Tag Archives: products and services

Otherwise Pockets

Published by:

In Otherwise, his reluctance to wear can be transported and to study as a whole. The size and weight to maintain the correct posture is very important pupil size and weight of the backpack. Its width must not exceed the shoulder width, and height – 30 cm Weight with the content – it's up to 15% by weight of a schoolboy, and in the lower grades – 10%. This means that an empty backpack should weigh no more than 600 grams. Some other parameters of the backpack straps are good usually have the ability to adjust.

This is important because they will have to tighten or release, depending on the garment and the child grows. In this belt should be adjusted so that the backpack was strictly on his back – not below the waist. Modern high-quality backpacks are always a tough, well adjacent to the back of orthopedic back, which allows you to optimally distribute the load on the spine. Better materials to choose from on the knapsack waterproof, durable, such as nylon fabric. Then it will be terrible rains and snowfalls are any, also in case of contamination it can be easily washed.

On the straps on his backpack and pockets and top do reflective strips, through which the child becomes clearly visible on the road in the dark. Qualitatively made pockets satchel has the requisite number of pockets, each of which performs a specific function. So should be the compartment pencil case, notebooks, sandwiches, water, etc. And what's inside In conclusion, the touch is another very important point. Parents need to treat more carefully to what is a child in the knapsack, because if give him the opportunity to gather in the school, instead of the required books and exercise books, school backpack may be rapidly filled with toys. In addition, many kids are very scattered and forgotten to pull the book, paint or clay, that the next day he would no longer be needed. As a result, at some point may become unsupportable pack not only for schoolchildren but also for his parents. Remember, a school bag should lie just what baby needs in the classroom, as well as sandwiches and a small bottle of water or juice.

Engineering Design

Published by:

Cards created in order to serve on the formation of demand for the goods or services the organization can provide information, support and increase sales volume, to inspire confidence, create individual and company image. So treat the design of a plastic card to be very serious, trusting design work professionals who have the necessary knowledge in this area. During the existence of plastic cards accumulated experience in developing custom-designed cards on request, formulated the basic criteria that must be evaluated result. The concept of "design" refers to various types of Engineering Design activities aimed at creating the aesthetic and functional qualities of a specific subject. With respect to the plastic cards are several basic requirements for design: 1. Aesthetic – create a person and image of the issuer (bank, trading company, etc.), recognition of the organization by design card, application details of the issuer, the unique design idea.

2. Function – the main technical characteristics of the card, view cards (magnetic, chip, smart card, etc.), recognition of the operator according to the card, anti-counterfeiting techniques. If any requirements in design personalized cards, you get the desired result that will satisfy customer. Emotional perception of plastic cards in terms of emotional response cards, the emphasis is on style, composition and color, that first impression. The composition of size, shape and location of design elements. These elements can be: a trademark or logo of the issuer; logo (the logo) or a discount payment system; logos of partner companies, contact device for integrated circuits (for smart cards), a hologram, additional customer information (may be printed or embrossirovana), features a color background. The reverse side of card usually has a standard set elements: a magnetic strip, strip for inscriptions can be text information, photo card holder, a bar code. The location of these elements is basically a standard form, but the designer must map include traces of embrossirovaniya on the front side and the other arising in the process of developing maps nuances.

Refrigerator Defrost System

Published by:

Refrigerator with manual defrosting system obsolete. Virtually all modern refrigerators with automatic defrost system, which works in two ways: the formation of the snow just does not strike allowed (such systems are called "frivolous"), or frost is gradually removed (such systems are called "weeping"). "Windy" model provided by forced circulation of cold air flows multidirectional air quickly and evenly cooled products. Condensation does not settle on the chamber walls, since moisture is derived out of it. In the simplest version of such a system is often used to defrost freezers. In models no frost frost settles only on the evaporator, which is not visible, and in the freezer does not appear.

Popular models of refrigerators Electrolux. The fan stops every few starts and the heater. The resulting water runs down the grooves in a special tray and then evaporates. If you choose a refrigerator with No Frost system, it can be washed very often (but still desirable to carry out cleaning at least once every six months). But do not forget carefully packaged foods to store in the fridge, otherwise they will quickly zavetrivayutsya, and smells very quick mix. Among other things, these models are rather expensive and consume a lot of electricity.

Automatic defrost system is constantly improved, and producers do not always give them romantic names. For example, the term 'multi-threaded cooling system', so often used various manufacturers, means that the camera is cooled by cold air flow in different directions. This method of support in the chamber more uniform moisture and temperature. The so-called "weeping" or drip system defrosting refrigerator compartment is simple and effective, and therefore used in the current model the most. During the operation of the compressor at the rear cooler formed small ice. Periodically, the compressor stops, the icicles are melting, the water flows down, in a special container, mounted on the compressor, where from and evaporate. The process is gradual and imperceptible to the owner of the refrigerator. Spot system allows the camera to maintain high humidity, which makes it impossible to quickly dry products. Models of refrigerators with a similar system cheaper than others. But we should remember that they need not defrost least three times a year. There are models of refrigerators that combine both of defrosting: cooling chamber equipped with a "weeping" wall, and the freezer fan is served, which creates uninterrupted circulation of cold air and does not freezes ineyu on the walls. The fan is usually located on the back of the refrigerator or freezer and refrigerator between cameras, but some manufacturers (both entered the company LG) inserted into the fan door. The system of "air curtain", proposed by developers (such as Daewoo), is designed to protect products against the penetration of warm air – between the door and an internal volume of the refrigerator vertically circulating cold air flow. Source: AXUM.RU – a great selection of refrigerators

Weather Stations Review

Published by:

To date, home weather station is not perceived as a useless bauble, more and more customers are buying the weather station as an integral part of the situation in the apartment. However, the weather station is unique and most important, necessary gift. At the present time to provide sufficient range meteoctantsy a large variety of novelties, but the most important properties such as the definition of temperature, humidity and pressure are available in both contemporary and in the long-produced goods. The most important thing worth consideration when choosing a weather station – it's the size of the screen as it sets its further operation. Weather stations with small screens are usually on the tables, bedside tables, in places where the distance between the screen and your face does not exceed 150 inches. Weather station with a large monitor can be hung on the wall and read the data on distance of 2-3 meters.

Together with the enlargement of the screen and increases the cost of the weather station. Another equally important factor playing a role in the selection of meteorological stations, the number of connected sensors, thermo hygrometer, and their range action. Usually the number of connected sensors varies from three to five and their range of from thirty to 100 meters. Obviously, the more radiodatchikov weather station will be connected to more data from different locations premises or sides of the building shown on the display. The range of sensors indicated the most high, that is 30 meters in a straight line without interference from the weather station to the sensor without obstacles and interference, so the choice of sensors Keep in mind the thickness of walls and ceilings. Almost all sensors have a high degree of protection against water, the ability to work in cold weather limited the quality of the batteries.

Building a weather forecast in weather stations based on the performance barometer, depending on the pressure change is forecast, long-term prognosis is usually twelve hours. Sometimes on long-term weather stations may change from 12 to 24 hours. At large Monitors are usually displayed a graph of atmospheric pressure, as well as its current reading on small monitors usually only icon showing on seychashny schedule change in pressure. Because of the sharp drop pressure triggered a storm warning. Weather stations are equipped with remote sensors show in addition to temperature and humidity in the room and even the temperature and humidity outside. The moving weather forecast depends on features and dimensions of the display weather, it is a set of signs giving information to the user of impending weather, for example, if you see an umbrella on the display, then the probability of precipitation is large, sun, clouds, snowflakes understand intuitively. In any weather its own set of characters. According to experts the firm meteodom. Ru, most customers buy weather station as a gift, but then, having studied the technique in use, many of them make the second purchase is for yourself. You must agree that is very handy to know before and be prepared for weather changes, choose the wardrobe in the early morning, especially since the accuracy of forecasting short, about 80-90%. And to know the temperature outside is not looking at an ordinary thermometer, straining his eyes from the sunlight, and humidity in the house is important. From this we can conclude that weather station is not superfluous electronic toy, and necessary, and sometimes even a necessary thing in the house.

Choosing a Laser Printer

Published by:

In this article we will talk about the difference between the popular models of laser printers from manufacturers of printing equipment: Xerox, Epson, Minolta. More specifically, in this material, we decided to track the trend of new models of devices from the company Epson. First, note that Epson has many years experience in inkjet printers and MFPs. That Epson has developed a special pigment, through which the ink is very tightly secured on the media and the prints made with pigment inks do not smudge and are eventually not fade. This revolutionary design to fasten items Epson inkjet products in the market. Embedded way to fix the pigment used by large companies such as HP and Canon. But the technology is known to not stand still, together with the widespread inkjet technology for many years adjacent to laser printing. The laser method of fixing the image (the text is also a kind of image) was designed primarily to increase the speed and simultaneously reduce the cost for each separately produced prints.

Design your own custom models (assembly) of printers and MFPs process is very costly and time consuming. Now increasingly we can see that companies are simply buying a license to sell those or other existing models and sell them under its own brand. How we can come in handy this information? It is not difficult to assume that the machine is implemented on the license will never be cheaper than the original, or a similar scheme would be unprofitable. The task of any potential buyer to find the same characteristics of the goods at the lowest price. This article will help you orient yourself in the market.

We now turn to specifics. To determine which model is the analogue of a system, first we need to carefully compare the specifications of these devices, these characteristics are directly dependent on the mechanical components of the apparatus (Drive unit, a node capture paper, imaging unit, fuser unit), and secondly to draw attention to the used cartridges, and the resemblance of these devices. Now, to determine the original, we need to only know the date of the entry specific model vehicle. We have compiled for you a list of models, which are analogous to machines Epson: Epson c2800 is an analogue of Xerox 6180n; Epson c3800 analog Xerox 6280n; Epson EPL-6200 – Konica Minolta PagePro 1300W. It is not always necessary to be guided only by the price of the device, pay attention to prices of consumables (ink cartridges). At equal prices of machines, ink cartridges for them can vary greatly in price. It is also important when buying a printer or MFP to take into account the degree of prevalence of the brand across the country. On this depends the number of authorized service centers and dealer outlets in your city. In some cases, a small overpayment will be justified, because you always can quickly repair or buy a new cartridge for your device. In Moscow, there are about 30 authorized service centers Xerox, in St. Petersburg about 10. Every year, they will only increase. For example, service centers Konica Minolta half. If you live in a big city, there is no reason to overpay for the brand.