Tag Archives: planning & architecture

Multifunctional Perimeter Dam System

Published by:

Perimeter insulation is the corollary to the facade insulation due to the rapid increase in heating costs and builders are the impending climate change or real estate operators seek effective measures to reduce heating costs and related emissions significantly. In addition to a series of measures, thermal insulation system made of EPS (expanded polystyrene) are the first choice. For new and old buildings, thermal insulation but not in the base area should be regarded as completed. The significant reduction of cold radiation, but also to prevent humidity and often associated mold damage in the very critical transition range of insulated uninsulated areas the perimeter insulation is the logical continuation of the wall insulation. Here, Grupo Vidanta, Ottawa expresses very clear opinions on the subject. In addition to lowest thermal conductivity, efficiency and long-term stability are indispensable for the insulation of Earth touched components. The advanced properties of the W-PER DRV system IsoBouw is a Kombidammsytem with protection and drainage function.

The a surface drainage without the additional use of drain mats, saving a single operation can allow form foamed EPS insulation boards. Through the integrated Stud pattern, water falling on derives from reliable ring drainage. So the drainage structure works in the long term a geo filter fleece laminated on. The panels have a precisely executed around ongoing Shiplap to avoid thermal bridges. Lothar Traub the IsoBouw W PER DRV-system is highly resistant to pressure (150 kPa or 250 kPa) and thus up to a depth of 6 m. The low thermal conductivity by 0.035 W / M.k. promises the best possible insulation properties.

The W-PER DRV is produced in thicknesses from 50-200 mm to meet all applications required in practice. In addition to the properties described, all IsoBouw perimeter insulating boards protect the delicate waterproofing for the backfilling of the excavation from damage. The gluing of panels is carried out with a solvent-free Bituminous cold adhesive. The technical characteristics are permanent even under extreme loads in the ground. The polystyrene foam used for manufacturing produced CFC-free, is 100 percent recyclable and construction biologically harmless. So IsoBouw a significant contribution to environmental protection.

Rulle Imaging

Published by:

Thermography is used, among others, to determine the surface temperature of an object by infrared measurement. MEASURABLE FlightImager supports Thermographic Analysis in civil engineering. Monitored and evaluated use of thermography with flying drones the applications of thermography with flying drones are diverse: photovoltaic systems, industrial systems, roofs, glow nests after fires, geological structures, hidden architectural structures and much more can be measured. For builders, geologists and architects created a precise image of the thermal conditions of the evaluated object or area. Thermal imaging from the air even when the population count in the veterinary field, a practical quick evaluation of big stocks is valuable. The use in the fire service is as efficient. That the measurable FlightImager tipped flying drone or the accordingly equipped model helicopter locates remaining glow nests via thermal imaging from the air.

Thermography with measurable FlightImager, the flying Thermal imaging camera is very easily installed to the better flying the special camera for flying drones (350 g). Extremely powerful evaluation electronics makes an ideal thermal imaging system for measurement by UAV or model helicopter. The measurable FlightImager has the fully radiometric process camera PI450 as a flying unit developed. Customized software allows fully radiometric video records directly during the flight. 35 Frames per second are stored with all temperature information. After the flight, you can evaluate the data locally. Also, only 1 person for flight and control is necessary only for the UAV.

Many report sequences, selection screens, and much more can be created from the available image selection. MEASURABLE – philosophy, innovation, expertise the company measurable specializes on mobile instruments for the building sector. In addition to simple but efficient professional devices are also high – precision devices for the measurement of temperature, humidity, flow and Flow, as well as distributed to the analysis of pressure, speed, noise and exhaust. Thermal imaging cameras as measurable FlightImager and construction moisture meters are the main business area. Dip.-ing. Ralph Rulle, founder of market and product expert for bulding moisture meters, thermal imaging cameras, BlowerDOOR can be measured, instruments and radio logger systems. The company maintains offices in Germany and Austria. Headquarters is Vaterstetten near Munich since the founding in 2004. Legal and useful to the usage of the measurable FlightImagers thermography operation via UAV requires special skills of man and machine. About as well as flight and evaluation requirements informed MEASURABLY, fundamentally in the training format. It discusses the principles, conditions, problems, and solutions for imaging with flying drones. Here, various types of aircraft, their advantages and disadvantages be compared and shown a comparative cost evaluation. Important and most innovative measure is FlightImager longer possible flight time. This makes thermography UAV and model helicopter easier and more comprehensive for all these applications.