Tag Archives: materials

Thermal Insulation Thermo – Insulation Of Facades Cottages

Published by:

During the heating period by enclosing parts inevitably occur heat losses, which range from 30 to 80% of the lost energy. The system enables improved thermal insulation to reduce these characteristics, and accordingly, as well as spending more than 5 times. It is not good insulated outer walls, in addition contribute to the creation of unfavorable indoor climate, condensation, resulting in is soaking building elements, as well as mold. These problems can be solved through adequate insulation of exterior walls. At warming facade cottages meneralovatnymi plates in large as reduced noise pollution. The facade of the house can be warmed in 3 ways: inner insulation, outer insulation and the insulation structure inside the wall. For the most part wish to be given to systems outside thermal insulation, as They have several advantages: protect walls from adverse environmental impacts (air, temperature, and biological); protect the walls from cooling, which prevents condensation on the inner surfaces, provide a "breathing" walls, as well as, of course, additional sound insulation, as well as long-term use.

Facade insulation systems depending on the technology falls into the following groups: – light plaster systems insulation – hard plaster thermal insulation system – ventilated facade construction. In light of plaster insulation systems plate heater is attached to the wall with glue and dowels, and then covered with a thin plaster layer. The total thickness of the layers does not exceed 15 millimeters. As can be seen that to the heat insulating material in front of the system presents the highest guidance. To perform qualified installation of light plaster systems require workers with relatively high qualifications, as the plaster must be applied evenly and durable layer of glass-fiber reinforcement. Plate heater in heavy plaster system is attached with steel mesh reinforcement, and anchors.

The thickness of the layers of insulation after sometimes can be up to 50 millimetrov.V this facade system, metal mesh protects the carrier topcoat of linear thermal strain. Here, as well as in the lungs of plaster systems, there are high notes on a heater. Ventilated facade system is similar to masonry with an air gap, only instead of the outer wall of various facing materials are used (boards or sheet material). Thermal insulation is fixed to the wall with the load-bearing frame, and anchor fastening system. Such a system insulation Facade provides ventilation of the inner layers, as well as promotes the removal of moisture, which saved the insulating properties of insulation and walls, as well as improves the appearance of the walls, and, importantly, increases the service life of insulation (up to 70 years!) depending on the material used. Used in modern construction of the outer insulation of houses provide an opportunity to not only effectively solve energy conservation, as well as provide opportunities to architects and designers to create a completely new image of the cottages, making them inaccessible to earlier forms. thermo grade materials are certified fire safety, sanitary and epidemiological certificates, certificates of radiation safety, as well as technical certificates RosStroy rf. In early 2007, the holding Thermosteps received the Certificate of Conformity quality management system according to international standards iso 9001:2000.