In addition, you can geotextile or a special need felt, decorative film to the edges (it glued sand, gravel or crushed stone), coconut leaf, containers for aquatic plants, tool for bonding and repair of the film. For more stability of the waterfront should ditch digging in a series of terraces, alternating with slopes. The steepness of slopes should not exceed 45 , and the width of the terraces to be at least 30 cm is very well looked shallow coastal waters with area, as well as swampy coastal strip. The depth of the pit should be 10-15 cm higher than you plan to be able to thoroughly compacted first layer of crushed stone, and then a sandy base with a minimum thickness of 10 cm Carefully Choose stones, roots. Only after that, and compaction can be spread or geotextile felts. They will protect the film from damage. Fabrics should be lapped cast. Stretches over geotextile wrap.
Previously it has to ripen in the sun on the lawn at least 2 hours. Today, the film sold a wide range of widths, it is better to buy such that it avoids the need to bond cloth. After placing the film must be carefully smooth out wrinkles and begin adding water, which gently lower the hose. First, fill the reservoir in the third. After 2-3 hours of continuing to fill the pond with water. Only after the water stretch film, you can start to design the top of the film of the pond.
First, trim the surplus produce of the film, then sealed the edges, forming a ridge, and only after that you can decorate the shore of the reservoir with a film pebbles or stone, gravel backfill or coarse sand. Secondly, you have to settle himself and coastal pond ornamental plants. Equipment for the small pond, decorative pond, of course, you can arrange in the garden of their own, especially because today a lot of literature.