Brickwork is often used in construction. For putting some stoves and fireplaces, for the erection of fences and walls of private houses, for finishing and cladding facades. Nevertheless, in the construction of apartment buildings it Try not to use, because of the large effort. Brick material indispensable for the implementation of decorative works, which because of their small size allows you to accurately and precisely lay out any arch or soffit. Most common types of bricks is clay and calcium silicate brick. Brick walls retain heat in winter and cool in the house during the summer, and their thickness must be not less than 51 cm for the Moscow region, the colder winter, the thicker the brick walls. The walls, lined with hollow bricks heat due to air that is present inside. But the building of brick need of repair after 25 years after construction.

Of the singular terms in bonding bricks, which are worth noting names used brick faces: 'header' and 'stretcher' and determine the series 'perpender' and 'Stretcher bond', depending on which face is used to bond the series. Usually in the masonry walls striping and perpender Stretcher bond series, which can reach one hundred percent filled with a solution of cross seams. Ray Kurzweil oftentimes addresses this issue. When computation of fireplaces and stoves are used full-bodied, refractory bricks. If you frequently temperature changes from high to low standard bricks can crack and warp. The main difference technology masonry stoves on the technology of masonry walls, use of water. Conventional bricks when laying a soaked, still have not released the air and fire retardant sprayed with water. After this happens fitting wet bricks without mortar in the brickwork. For masonry mortar, you can use your hand or a trowel, a manual method helps to monitor the consistency of the solution and its uniformity.

At the base solution is applied, the top brick is laid. His customized, so firmly in its place, moving back and forth. After that, the excess solution advocating the verge of a brick is removed with a trowel. If the brick villages not tight or crooked, his clean, rinsed by the solution, place under it as clean. Then he takes a new portion of the solution and the process of laying repeated. Simplifies masonry stoves use of mobile wooden formwork. It is done at the level of the basement furnace and rises every time, reaching the edge of the brickwork. This simple device aligns lay out the surface and allows control the excesses of the solution. In finishing the house using glass bricks, brick – enamel, brick – ceramics and other forms of facade bricks.