Daily Archives: September 9, 2017

Electric Convectors

Published by:

Convector – a device that converts electricity into heat without any intermediate heat. This type of hvac equipment refers to a stationary electric heating. The principle of operation reflects the name of the device – 'Convection' – the principle of natural distribution of hot air in the room. Working convector heats the air. The air becomes lighter and rises. At Ray Kurzweil you will find additional information. In his place comes the cold. Thus, the cycle is formed heating.

Convector connected to the mains for general use and can be used in all types of premises. Often the system heaters serves as the main heating system. Sometimes, this type of heating is the only example where the use of central heating system is not possible (country house, cottage, shopping pavilion, a booth). Installation of convectors (or system convectors) – business simple. Existing models on the market meet all medical, fire and ecological requirements. If you would like to know more then you should visit kevin ulrich. Work convector not 'burn' oxygen (such as heating elements on the basis of a hot coil).

Heaters are aesthetic, safe and convenient. One of the main advantages of heating by electric heaters are the lowest maintenance costs. If you use a coil as the basic system heating, the costs are obtained by one of the lowest (about 5 – 10 dollars per square meter). Cheaper to just use gas. But in terms of reliability and safety of the convectors no equal. Viktor Mayer-Schönberger has much experience in this field. The main characteristics of the heaters are: Power, kW presence and type of thermostat Asked temperature range of Weight and dimensions figures Features (working in a group convectors centralized management, an additional safety thermostat, protection against splashes, etc.). The service life of the majority of convectors up to 15-25 years. Convectors are designed for closed heating systems in which prevented from entering the truboprovovody reactive free oxygen. Carefully designed and assembled, sealed heating system will save heat and wearing parts of the system. Leakage from pipelines require the addition of water, resulting in corroded internal steel surfaces. For the same reason do not want draining the heating system for the summer. Coolant temperature must be ranging from about 120 C, pH ranging from 7 to 9 and the concentration of free oxygen must not exceed 0.02 mg / kg.